供应阿法拉伐原装进口钎焊接换热器CB200

General information
Alfa Laval introduced its first brazed plate heat exchanger
(BHE) in 1977 and has since continuously developed and optimized
its performance and reliability.
Brazing the stainless steel plates together eliminates the need
for gaskets and thick frame plates. The brazing material seals
and holds the plates together at the contact points ensuring
optimal heat transfer efficiency and pressure resistance. The
plate design guarantees the longest possible life.
The design options of the brazed heat exchanger are extensive.
Different plate patterns are available for various duties
and performance specifications. You can choose a standard
configuration BHE, or a unit designed according to your own
specific needs. The choice is entirely yours.
Typical applications
- HVAC heating/cooling
- Refrigerant applications
- Industrial heating/cooling
- Oil cooling
Working principles
The heating surface consists of thin corrugated metal plates
stacked on top of each other. Channels are formed between
the plates and corner ports are arranged so that the two
media flow through alternate channels, usually in countercurrent
flow for the most efficient heat transfer process.
Standard design
The plate pack is covered by cover plates. Connections are
located in the front or rear cover plate. To improve the heat
transfer design, the channel plates are corrugated.
Particulars required for quotation
To enable Alfa Laval’s representative to make a specific quotation,
specify the following particulars in your enquiry:
- required flow rates or heat load
- temperature program
- physical properties of liquids in question
- desired working pressure
- maximum permitted pressure drop
Outside Welding
threaded
Compact flanges
26 (377)
25 (363)
27 (392)
TS
°C
(°F)
PS bar / (PSI)
S1 - S2 CBH200
S3 - S4 CBH200
S1 - S2 CB200
S3 - S4 CB200
-196
(-321)
30 (435)
30 (435)
90
(194)
125
(257)
150
(302)
175
(347)
225
(437)
200
(392)
32 (464)
31 (450)
34 (493)
33 (479)
37 (537)
377 (26)
363 (25)
TS
°F
(°C)
PSI / (PS bar)
S1 - S2 CBH200
S3 - S4 CBH200
S1 - S2 CB200
S3 - S4 CB200
-155
(-104)
392 (27)
392
(200)
421 (29)
PCT00111EN 0904
* Water at 5 m/s (16.4 ft/s) (connection velosity)
Standard materials
Cover plates Stainless steel
Connections Stainless steel
Plates Stainless steel
Brazing material Copper
Standard data
Min. working temperature see graph
Max. working temperature see graph
Min. working pressure vacuum
Max. working pressure see graph
Volume per channel, litres (ga) 0.51 (0.13)
Max particle size mm (inch) 1.8 (0.07)
Max flowrate m3/h (gpm)* 128 (564)
Min no of plates 10
Max no of plates 230
How to contact Alfa Laval
Up-to-date Alfa Laval contact
details for all countries are always
available on our website at
www.alfalaval.com.
Alfa Laval reserves the right to change specifications without prior notification.
CB200/CBH200 – PED approval pressure/temperature graph*
CB200/CB200H - ASME approval/temperature graph*
* For exact values please contact your local Alfa Laval representative.
A
205 (8.1)
324 (12.8)
93
(3.7)
624 (24.6)
742 (29.2)
210 (8.3)
151 (5.9)
S2
S4 S1
S3
400 (15.7)
340 (13.4)
Standard dimension and weight*
CB200
A measure mm = 11 + (n x 2.7) - 10
A measure inch = 0.43 + (n x 0.11)
Weight kg** = 29 + (n x 0.6)
Weight lb** = 64 + (n x 1.32)
CBH200
A measure mm = 14 + (n x 2.7) - 10
A measure inch = 0.55 + (n x 0.11)
Weight kg** = 30 + (n x 0.6)
Weight lb** = 66 + (n x 1.32)